cura安装流程
安装教程:https://github.com/Ultimaker/Cura/wiki/Running-Cura-from-Source-on-Windows
pip install scipy cryptography colorlog netifaces zeroconf trimesh sentry_sdk pyserial PyQt5==5.15.2 keyring requests pywin32
安装相应的包
- 使用开始目录下的Developer Command Prompt for VS 2019并激活activate相应的python环境
- 所有的包安装都需要在上述的Command中通过命令行的形式完成
protobuf
- Download Protobuf 3.15.7 from here.
- Extract it to
C:/dev so that you then have a C:/dev/protobuf-3.15.7 directory. - Navigate to the
protobuf-3.15.7 directory:
cd C:/dev/protobuf-3.15.7
- Create the build and install directories.
- Build and install Protobuf
cmake -DCMAKE_INSTALL_PREFIX=../install_dir -DCMAKE_INSTALL_LIBDIR=lib -Dprotobuf_BUILD_TESTS=OFF -DCMAKE_BUILD_TYPE=Release -G "NMake Makefiles" ../cmake
nmake
nmake install
sip
- Download SIP 4.19.25 from here.
- Extract it to
C:/dev so it creates a C:/dev/sip-4.19.25 directory. The last part of the version should be removed from the name. - Navigate to the
sip-4.19.25 directory:
cd C:/dev/sip-4.19.25
- Build and install SIP (again making sure to use the command prompt provided by Visual Studio):
python configure.py
nmake
nmake install
arcus
一开始这个库的python版本老是安装在c盘的一个python3.9路径下,把该python3.9移开后可正常安装在anaconda的环境中
同时报错找不到pyhon3.8.lib也是由于上面找不到正常的安装路径导致
- Clone the
libArcus repository
git clone -b "build_from_source_windows" https://github.com/Ultimaker/libArcus.git C:\dev\libArcus
此处若后续编译出现python版本不匹配的情况,通过git checkout命令将包切换至远端origin/4.4
- Navigate to the
libArcus directory
cd C:\dev\libArcus
- Create the build directory:
mkdir install_dir
mkdir build && cd build
- Set the environment variables for Protobuf:
set PROTOBUF_SRC=J:\code\software_lib\cura\cura_4.4_related\protobuf-3.15.7
set PROTOBUF_INSTALL=%PROTOBUF_SRC%\install_dir
- Build and install
libArcus (again making sure to use the command prompt provided by visual studio):
cmake -DCMAKE_INSTALL_PREFIX=../install_dir -DPROTOBUF_SRC_ROOT_FOLDER=%PROTOBUF_SRC% -DPROTOBUF_LIBRARY=%PROTOBUF_INSTALL%/lib/libprotobuf.lib -DPROTOBUF_INCLUDE_DIR=%PROTOBUF_INSTALL%/include -DPROTOBUF_PROTOC_EXECUTABLE=%PROTOBUF_INSTALL%/bin/protoc.exe -DBUILD_EXAMPLES=OFF -DBUILD_STATIC=ON -DMSVC_STATIC_RUNTIME=ON -DCMAKE_BUILD_TYPE=Release -G "NMake Makefiles" ..
nmake
nmake install
Savitar
按照说明安装即可
Charon
按照说明安装即可
pynest2d
此处坑比较多,详细操作如下:
- git clone Ultimaker的libnest2d库
- 将库切换到分支CURA-7754_add_disallowed_areas
- 此处切换分支是因为主分支不包含external文件夹,cmake不会自动下载boost,clipper,NLopt库
- 该分支包含external文件夹
- 将分支中external中的boost库cmakelist中的下载地址更换为:https://boostorg.jfrog.io/artifactory/main/release/1.70.0/source/boost_1_70_0.tar.gz
- 此处是安装libnest原项目中的boost库下载地址设置的
- libnest库必须使用Ultimaker fork后的库,否则编译时会报错
按照说明安装即可
CuraEngine
此处参考官方文档即可 但在最后编译CuraEngin.exe时会报错,是编译的makefile中路径出现错误
g++.exe: error: J:codesoftware_libcuraCuraEngine4.4relatedprotobuf-3.15.7-mingw/install_dir/lib/libprotobuf.a: No such file or directory
通过vscode直接查找cmak_build文件夹中包含libprotobuf.a的路径,把路径中的斜杠全部改为反斜杠\即可 实际修改了build.make和linklibs.rsp
Cura
按照说明将CuraEngine.exe复制到Cura的文件夹下运行cura_app.py即可
报错缺少shapely,pip install shapely即可
目前发现存在bug,slice切片无法使用 尚未解决
|