文章目录
- 环境规划
- Linux 安装
- 设置开机启动级别（字符界面而不是GUI界面）
- 关闭防火墙与 selinux
- 配置IP 与 DNS
- linux 系统参数配置
- 上传 iso 包
- 挂载
- 临时挂载
- 测试挂载是否OK
- 备份原有 yum 源
- 新增YUM配置文件
- 刷新YUM缓存
- 安装相关包
- 准备工作
- 环境变量配置
- 关闭透明大页
- 克隆虚拟机之后
- 下载 repmgr [ALL]
- 配置ip别名 [ALL]
- 编译安装 repmgr [ALL]
- 配置 pgsql 互信 5台机器 [node110]
- 测试
- 配置防火墙 [ALL]
- 配置归档等参数 [ALL]
- 启动数据库 [ALL]
- 创建相关用户 [ALL]
- 所有节点执行 以 pgsql用户执行
- 测试配置是否OK
- 所有个节点分别修改 repmgr.conf
- 主库注册 [node110]
- 备库克隆与注册 [node111; node112]
- 正常switchover [在 node111]
- 配置自动 fail over
- 测试自动切换
- 等node110 修复之后, 重新加入集群
- 加入集群之后, 在通过 swtichover 手动切换回主库
- 下载安装 pgpool2
- 环境变量配置
- 拷贝参数
- 修改pgpool.conf
- 配置 pool_hba.conf
- 生成pool_passwd文件
- 配置 pcp.conf
- 在主库中创建用户
- node114
- 实际操作
- 连接 pgpool
- 查看pgpool 后端状态
- 测试, 开三个窗口
- 关闭客户端日志打印
CentOS7.9 安装 PG13 + repmgr +pgpool 实现负载均衡读写分离
环境规划
192.168.0.110 node110 master
192.168.0.111 node111 slave1
192.168.0.112 node112 slave2
192.168.0.113 node113 witness
192.168.0.114 node114 pgpool
Linux 安装
-
最小话安装–> 调试工具
-
GUI 服务器
硬件监控
java平台
KDE桌面
大系统性能
主框架访问
性能工具
兼容性程序库
开发工具
系统管理工具
设置开机启动级别（字符界面而不是GUI界面）
systemctl get-default
systemctl set-default multi-user.target
systemctl get-default
关闭防火墙与 selinux
systemctl stop firewalld #临时关闭
systemctl disable firewalld #永久关闭,即设置开机的时候不自动启动
getenforce
setenforce 0
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
配置IP 与 DNS
vim /etc/sysconfig/network-scripts/ifcfg-ens32
DNS1="114.114.114.114"
DNS2="8.8.8.8"
service network restart
linux 系统参数配置
cat >> /etc/sysctl.conf <<"EOF"
kernel.shmall = 4294967296
kernel.shmmax=135497418752
kernel.shmmni = 4096
kernel.sem = 50100 64128000 50100 1280
fs.file-max = 7672460
fs.aio-max-nr = 1048576
net.ipv4.ip_local_port_range = 9000 65000
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 4194304
net.ipv4.tcp_max_syn_backlog = 4096
net.core.netdev_max_backlog = 10000
net.ipv4.netfilter.ip_conntrack_max = 655360
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_tw_recycle=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_keepalive_time = 72
net.ipv4.tcp_keepalive_probes = 9
net.ipv4.tcp_keepalive_intvl = 7
vm.zone_reclaim_mode=0
vm.dirty_background_bytes = 40960000
vm.dirty_ratio = 80
vm.dirty_expire_centisecs = 6000
vm.dirty_writeback_centisecs = 50
vm.swappiness=0
vm.overcommit_memory = 0
vm.overcommit_ratio = 90
EOF
sysctl -p
cat >> /etc/security/limits.conf <<"EOF"
* soft nofile 131072
* hard nofile 131072
* soft nproc 131072
* hard nproc 131072
* soft core unlimited
* hard core unlimited
* soft memlock 500000000
* hard memlock 500000000
EOF
rm -f /etc/security/limits.d/*
上传 iso 包
挂载
临时挂载
# mount -o loop,defaults,ro /mnt/iso/CentOS-7-x86_64-Everything-2009.iso /iso
# 永久挂载
echo "/mnt/iso/CentOS-7-x86_64-Everything-2009.iso /iso iso9660 defaults 0 0" >> /etc/fstab
测试挂载是否OK
mount -a
备份原有 yum 源
cd /etc/yum.repos.d/
mkdir /bak
mv * /bak
新增YUM配置文件
cd /etc/yum.repos.d/
cat > local.repo <<"EOF"
[local-yum]
name=Local Repository
baseurl=file:///iso
enabled=1
gpgcheck=0
EOF
刷新YUM缓存
yum clean all
#yum源更新命令
yum clean all
yum makecache
yum update
安装相关包
yum install -y zlib-devel numactl
准备工作
useradd pgsql
echo "passwd" | passwd --stdin pgsql
mkdir -p /postgresql/{pgdata,pgsql,archive,soft}
chown -R pgsql.pgsql /postgresql
su - pgsql
cd /postgresql/soft
wget https://ftp.postgresql.org/pub/source/v13.3/postgresql-13.3.tar.gz
tar zxvf postgresql-13.3.tar.gz
cd postgresql-13.3
./configure --prefix=/postgresql/pgsql
make world -j 8
make install-world
环境变量配置
cat >> ~/.bash_profile <<"EOF"
export PS1="$USER@`/bin/hostname -s`-> "
export PGPORT=5432
export PGDATA=/postgresql/pgdata
export LANG=en_US.utf8
export PGHOME=/postgresql/pgsql
export LD_LIBRARY_PATH=$PGHOME/lib:/lib64:/usr/lib64:/usr/local/lib64:/lib:/usr/lib:/usr/local/lib:$LD_LIBRARY_PATH
export PATH=$PGHOME/bin:$PATH:.
export DATE=`date +"%Y%m%d%H%M"`
export PGUSER=postgres
export PGDATABASE=postgres
EOF
source ~/.bash_profile
initdb -D $PGDATA -E UTF8 --locale=C -U postgres
cat >> $PGDATA/postgresql.conf <<"EOF"
listen_addresses = '*'
port = 5432
logging_collector = on
log_filename = 'postgresql-%u.log'
log_truncate_on_rotation = on
EOF
cat >> $PGDATA/pg_hba.conf <<"EOF"
host all all 0.0.0.0/0 md5
EOF
pg_ctl start
psql -h localhost -c "alter user postgres with password 'passwd';"
关闭透明大页
vim /etc/default/grub
修改之前：GRUB_CMDLINE_LINUX="rhgb quiet"
修改之后：GRUB_CMDLINE_LINUX="rhgb quiet transparent_hugepage=never"
grub2-mkconfig -o /boot/grub2/grub.cfg
numactl --show
numactl --hardware
reboot
克隆虚拟机之后
- 修改主机名
vim /etc/hostname - 修改IP地址
vim /etc/sysconfig/network-scripts/ifcfg-ensxx
删除uuid - 删除/etc/udev/rules.d下的网络相关文件/
下载 repmgr [ALL]
wget https://repmgr.org/download/repmgr-5.2.1.tar.gz
配置ip别名 [ALL]
cat >> /etc/hosts <<EOF
192.168.0.110 node110
192.168.0.111 node111
192.168.0.112 node112
192.168.0.113 node113
192.168.0.114 node114
EOF
编译安装 repmgr [ALL]
tar zxvf repmgr-5.2.1.tar.gz
cd repmgr-5.2.1/
./configure && make -j8 && make install
配置 pgsql 互信 5台机器 [node110]
上传文件 sshUserSetup.sh
以 root 用户执行
./sshUserSetup.sh -user pgsql -hosts "node110 node111 node112 node113 node114" -advanced exverify -confirm
su - pgsql
chmod 600 /home/pgsql/.ssh/config
测试
su - pgsql
ssh node111
hostname
ssh node112
hostname
ssh node113
hostname
ssh node114
hostname
配置防火墙 [ALL]
cat >> $PGDATA/pg_hba.conf <<"EOF"
local repmgr repmgr md5
host repmgr repmgr 127.0.0.1/32 md5
host repmgr repmgr 192.168.0.0/24 md5
local replication repmgr md5
host replication repmgr 127.0.0.1/32 md5
host replication repmgr 192.168.0.0/24 md5
EOF
配置归档等参数 [ALL]
cat >> $PGDATA/postgresql.conf <<"EOF"
# 归档参数
wal_level='replica'
archive_mode='on'
archive_command='test ! -f /postgresql/archive/%f && cp %p /postgresql/archive/%f'
restore_command='cp /postgresql/archive/%f %p'
# 主从流复制
hot_standby=on
max_wal_senders=10
wal_sender_timeout=60s
wal_keep_size=16MB
# 主从切换参数，启用PG数据库的复制槽，PG12不需要"use_replication_slots=true"这个参数了。
max_replication_slots=10
wal_log_hints=on
# 自动切换
shared_preload_libraries ='repmgr'
EOF
启动数据库 [ALL]
pg_ctl restart
创建相关用户 [ALL]
createuser -s repmgr
createdb repmgr -O repmgr
psql -c "alter user repmgr with password 'repmgr';"
psql -c "alter user repmgr set search_path to repmgr, \"\$user\",public;"
所有节点执行 以 pgsql用户执行
> ~/.pgpass
echo "*:*:*:repmgr:repmgr" > ~/.pgpass
# 必须授予权限
chmod 600 ~/.pgpass
测试配置是否OK
psql 'host=node110 user=repmgr dbname=repmgr connect_timeout=2'
psql 'host=node111 user=repmgr dbname=repmgr connect_timeout=2'
psql 'host=node112 user=repmgr dbname=repmgr connect_timeout=2'
psql 'host=node113 user=repmgr dbname=repmgr connect_timeout=2'
所有个节点分别修改 repmgr.conf
以 pgsql 用户执行如下命令
cat > $PGHOME/repmgr.conf << "EOF"
node_id=1
node_name=node110
conninfo='host=192.168.0.110 user=repmgr password=repmgr dbname=repmgr connect_timeout=2'
data_directory='/postgresql/pgdata'
pg_bindir='/postgresql/pgsql/bin'
monitoring_history=yes
monitor_interval_secs=5
failover=automatic
reconnect_attempts=6
reconnect_interval=5
promote_command='repmgr standby promote -f /postgresql/pgsql/repmgr.conf --log-to-file'
follow-command='repmgr standby follow -f /postgresql/pgsql/repmgr.conf --log-to-file --upstream-node-id=%n'
log_level=INFO
log_status_interval=10
log_file=/postgresql/pgsql/repmgr.log
EOF
-- 从库1
cat > $PGHOME/repmgr.conf << "EOF"
node_id=2
node_name=node111
conninfo='host=192.168.0.111 user=repmgr password=repmgr dbname=repmgr connect_timeout=2'
data_directory='/postgresql/pgdata'
pg_bindir='/postgresql/pgsql/bin'
monitoring_history=yes
monitor_interval_secs=5
failover=automatic
reconnect_attempts=6
reconnect_interval=5
promote_command='repmgr standby promote -f /postgresql/pgsql/repmgr.conf --log-to-file'
follow-command='repmgr standby follow -f /postgresql/pgsql/repmgr.conf --log-to-file --upstream-node-id=%n'
log_level=INFO
log_status_interval=10
log_file=/postgresql/pgsql/repmgr.log
EOF
-- 从库2
cat > $PGHOME/repmgr.conf << "EOF"
node_id=3
node_name=node112
conninfo='host=192.168.0.112 user=repmgr password=repmgr dbname=repmgr connect_timeout=2'
data_directory='/postgresql/pgdata'
pg_bindir='/postgresql/pgsql/bin'
monitoring_history=yes
monitor_interval_secs=5
failover=automatic
reconnect_attempts=6
reconnect_interval=5
promote_command='repmgr standby promote -f /postgresql/pgsql/repmgr.conf --log-to-file'
follow-command='repmgr standby follow -f /postgresql/pgsql/repmgr.conf --log-to-file --upstream-node-id=%n'
log_level=INFO
log_status_interval=10
log_file=/postgresql/pgsql/repmgr.log
EOF
-- witness节点
cat > $PGHOME/repmgr.conf << "EOF"
node_id=4
node_name=node113
conninfo='host=192.168.0.113 user=repmgr password=repmgr dbname=repmgr connect_timeout=2'
data_directory='/postgresql/pgdata'
pg_bindir='/postgresql/pgsql/bin'
monitoring_history=yes
monitor_interval_secs=5
failover=automatic
reconnect_attempts=6
reconnect_interval=5
promote_command='repmgr standby promote -f /postgresql/pgsql/repmgr.conf --log-to-file'
follow-command='repmgr standby follow -f /postgresql/pgsql/repmgr.conf --log-to-file --upstream-node-id=%n'
log_level=INFO
log_status_interval=10
log_file=/postgresql/pgsql/repmgr.log
EOF
主库注册 [node110]
repmgr -f /postgresql/pgsql/repmgr.conf primary register --dry-run
repmgr -f /postgresql/pgsql/repmgr.conf primary register
repmgr -f /postgresql/pgsql/repmgr.conf cluster show
备库克隆与注册 [node111; node112]
pg_ctl stop
rm -rf /postgresql/pgdata
- 测试克隆
repmgr -h node110 -U repmgr -d repmgr -f /postgresql/pgsql/repmgr.conf standby clone --dry-run
- 真实执行
repmgr -h node110 -U repmgr -d repmgr -f /postgresql/pgsql/repmgr.conf standby clone --force
- 启动PG
pg_ctl start - 注册从库
repmgr -f /postgresql/pgsql/repmgr.conf standby register
- witness节点注册 [node113]
repmgr -f /postgresql/pgsql/repmgr.conf -h node110 -U repmgr -d repmgr witness register --dry-run
repmgr -f /postgresql/pgsql/repmgr.conf -h node110 -U repmgr -d repmgr witness register
正常switchover [在 node111]
- 测试
repmgr -f /postgresql/pgsql/repmgr.conf standby switchover --siblings-follow --force-rewind --dry-run
- 真实执行
repmgr -f /postgresql/pgsql/repmgr.conf standby switchover --siblings-follow --force-rewind --log-level DEBUG --verbose
– 可以debug打印详细的切换过程
# repmgr -f /postgresql/pgsql/repmgr.conf standby switchover --siblings-follow --force-rewind --log-level DEBUG --verbose
配置自动 fail over
- 在所有节点都配置文件 $PGHOME/repmgr.conf，增加内容包括：
cat >> $PGHOME/repmgr.conf << "EOF"
monitoring_history=yes
monitor_interval_secs=5
failover=automatic
reconnect_attempts=6
reconnect_interval=5
promote_command='repmgr standby promote -f /postgresql/pgsql/repmgr.conf --log-to-file'
follow_command='repmgr standby follow -f /postgresql/pgsql/repmgr.conf --log-to-file --upstream-node-id=%n'
log_level=INFO
log_status_interval=10
log_file='/postgresql/pgsql/repmgr.log'
EOF
root用户下执行
cat >> /etc/logrotate.conf <<"EOF"
/postgresql/pgsql/repmgr.log
{
missingok
compress
rotate 30
daily
dateext
create 0600 pg13 pg13
}
EOF
*在所有节点都启动repmgrd进程
- 启动
repmgrd -f /postgresql/pgsql/repmgr.conf --pid-file /tmp/repmgrd.pid --daemonize
– 建议加到开机自动启动:/etc/rc.local
echo "repmgrd -f /postgresql/pgsql/repmgr.conf --pid-file /tmp/repmgrd.pid --daemonize" >> /etc/rc.local
chmod +x /etc/rc.d/rc.local
- 停止
kill -9 `cat /tmp/repmgrd.pid`
- 查看日志
tailf /postgresql/pgsql/repmgr.log
测试自动切换
模拟主机宕机[node110]
pg_ctl stop
node 111:提升为主库
HINT: execute with --verbose option to see connection error messages
pgsql@node111-> repmgr -f /postgresql/pgsql/repmgr.conf cluster show --verbose
NOTICE: using provided configuration file "/postgresql/pgsql/repmgr.conf"
INFO: connecting to database
ERROR: connection to database failed
DETAIL:
could not connect to server: Connection refused
Is the server running on host "192.168.0.110" and accepting
TCP/IP connections on port 5432?
DETAIL: attempted to connect using:
user=repmgr password=repmgr connect_timeout=2 dbname=repmgr host=192.168.0.110 fallback_application_name=repmgr options=-csearch_path=
ID | Name | Role | Status | Upstream | Location | Priority | Timeline | Connection string
----+---------+---------+-----------+----------+----------+----------+----------+--------------------------------------------------------------------------------
1 | node110 | primary | - failed | ? | default | 100 | | host=192.168.0.110 user=repmgr password=repmgr dbname=repmgr connect_timeout=2
2 | node111 | primary | * running | | default | 100 | 4 | host=192.168.0.111 user=repmgr password=repmgr dbname=repmgr connect_timeout=2
3 | node112 | standby | running | node111 | default | 100 | 3 | host=192.168.0.112 user=repmgr password=repmgr dbname=repmgr connect_timeout=2
4 | node113 | witness | * running | node111 | default | 0 | n/a | host=192.168.0.113 user=repmgr password=repmgr dbname=repmgr connect_timeout=2
WARNING: following issues were detected
- when attempting to connect to node "node110" (ID: 1), following error encountered :
"could not connect to server: Connection refused
Is the server running on host "192.168.0.110" and accepting
TCP/IP connections on port 5432?"
等node110 修复之后, 重新加入集群
repmgr -f /postgresql/pgsql/repmgr.conf node rejoin -d 'host=node111 user=repmgr dbname=repmgr connect_timeout=2'
加入集群之后, 在通过 swtichover 手动切换回主库
repmgr -f /postgresql/pgsql/repmgr.conf standby switchover --siblings-follow --force-rewind --dry-run
pgsql@node110-> repmgr -f /postgresql/pgsql/repmgr.conf standby switchover --siblings-follow --force-rewind --dry-run
NOTICE: checking switchover on node "node110" (ID: 1) in --dry-run mode
INFO: prerequisites for using pg_rewind are met
INFO: SSH connection to host "192.168.0.111" succeeded
INFO: able to execute "repmgr" on remote host "192.168.0.111"
INFO: all sibling nodes are reachable via SSH
INFO: 3 walsenders required, 10 available
INFO: demotion candidate is able to make replication connection to promotion candidate
INFO: 0 pending archive files
INFO: replication lag on this standby is 0 seconds
INFO: would pause repmgrd on node "node110" (ID 1)
INFO: would pause repmgrd on node "node111" (ID 2)
INFO: would pause repmgrd on node "node112" (ID 3)
INFO: would pause repmgrd on node "node113" (ID 4)
NOTICE: local node "node110" (ID: 1) would be promoted to primary; current primary "node111" (ID: 2) would be demoted to standby
INFO: following shutdown command would be run on node "node111":
"/postgresql/pgsql/bin/pg_ctl -D '/postgresql/pgdata' -W -m fast stop"
INFO: parameter "shutdown_check_timeout" is set to 60 seconds
INFO: prerequisites for executing STANDBY SWITCHOVER are met
pgsql@node110->
pgsql@node110->
pgsql@node110-> repmgr -f /postgresql/pgsql/repmgr.conf standby switchover --siblings-follow --force-rewind
NOTICE: executing switchover on node "node110" (ID: 1)
NOTICE: local node "node110" (ID: 1) will be promoted to primary; current primary "node111" (ID: 2) will be demoted to standby
NOTICE: stopping current primary node "node111" (ID: 2)
NOTICE: issuing CHECKPOINT on node "node111" (ID: 2)
DETAIL: executing server command "/postgresql/pgsql/bin/pg_ctl -D '/postgresql/pgdata' -W -m fast stop"
INFO: checking for primary shutdown; 1 of 60 attempts ("shutdown_check_timeout")
INFO: checking for primary shutdown; 2 of 60 attempts ("shutdown_check_timeout")
NOTICE: current primary has been cleanly shut down at location 0/C000028
NOTICE: promoting standby to primary
DETAIL: promoting server "node110" (ID: 1) using pg_promote()
NOTICE: waiting up to 60 seconds (parameter "promote_check_timeout") for promotion to complete
NOTICE: STANDBY PROMOTE successful
DETAIL: server "node110" (ID: 1) was successfully promoted to primary
NOTICE: issuing CHECKPOINT on node "node110" (ID: 1)
ERROR: unable to execute CHECKPOINT
INFO: local node 2 can attach to rejoin target node 1
DETAIL: local node's recovery point: 0/C000028; rejoin target node's fork point: 0/C0000A0
NOTICE: setting node 2\'s upstream to node 1
WARNING: unable to ping "host=192.168.0.111 user=repmgr password=repmgr dbname=repmgr connect_timeout=2"
DETAIL: PQping() returned "PQPING_NO_RESPONSE"
NOTICE: starting server using "/postgresql/pgsql/bin/pg_ctl -w -D '/postgresql/pgdata' start"
WARNING: node "node111" attached in state "startup"
NOTICE: NODE REJOIN successful
DETAIL: node 2 is now attached to node 1
WARNING: node "node111" attached in state "startup"
INFO: waiting for node "node111" (ID: 2) to connect to new primary; 1 of max 60 attempts (parameter "node_rejoin_timeout")
DETAIL: node "node110" (ID: 2) is currrently attached to its upstream node in state "startup"
NOTICE: node "node110" (ID: 1) promoted to primary, node "node111" (ID: 2) demoted to standby
NOTICE: executing STANDBY FOLLOW on 2 of 2 siblings
INFO: node 4 received notification to follow node 1
INFO: STANDBY FOLLOW successfully executed on all reachable sibling nodes
NOTICE: switchover was successful
DETAIL: node "node110" is now primary and node "node111" is attached as standby
NOTICE: STANDBY SWITCHOVER has completed successfully
pgsql@node110-> repmgr -f /postgresql/pgsql/repmgr.conf cluster show
ID | Name | Role | Status | Upstream | Location | Priority | Timeline | Connection string
----+---------+---------+-----------+----------+----------+----------+----------+--------------------------------------------------------------------------------
1 | node110 | primary | * running | | default | 100 | 5 | host=192.168.0.110 user=repmgr password=repmgr dbname=repmgr connect_timeout=2
2 | node111 | standby | running | node110 | default | 100 | 4 | host=192.168.0.111 user=repmgr password=repmgr dbname=repmgr connect_timeout=2
3 | node112 | standby | running | node110 | default | 100 | 4 | host=192.168.0.112 user=repmgr password=repmgr dbname=repmgr connect_timeout=2
4 | node113 | witness | * running | node110 | default | 0 | n/a | host=192.168.0.113 user=repmgr password=repmgr dbname=repmgr connect_timeout=2
pgsql@node110->
下载安装 pgpool2
mkdir -p /postgresql/pgpool
wget https://www.pgpool.net/mediawiki/images/pgpool-II-4.2.2.tar.gz
tar -zxvf pgpool-II-4.2.2.tar.gz
cd pgpool-II-4.2.2/
./configure --prefix=/postgresql/pgpool --with-pgsql=/postgresql/pgsql
make -j 8 && make install
环境变量配置
echo 'export PATH=/postgresql/pgpool/bin:$PATH' >> /home/pgsql/.bash_profile
source /home/pgsql/.bash_profile
拷贝参数
cp /postgresql/pgpool/etc/pgpool.conf.sample /postgresql/pgpool/etc/pgpool.conf
cp /postgresql/pgpool/etc/pool_hba.conf.sample /postgresql/pgpool/etc/pool_hba.conf
cp /postgresql/pgpool/etc/pcp.conf.sample /postgresql/pgpool/etc/pcp.conf
修改pgpool.conf
cat >> /postgresql/pgpool/etc/pgpool.conf <<"EOF"
# - pgpool Connection Settings -
listen_addresses = '*'
# - Backend Connection Settings -
backend_hostname0 = '192.168.0.110'
backend_port0 = 5432
backend_weight0 = 1
backend_data_directory0 = '/postgresql/pgdata'
backend_flag0 = 'ALLOW_TO_FAILOVER'
backend_application_name0 = 'node110'
backend_hostname1 = '192.168.0.111'
backend_port1 = 5432
backend_weight1 = 1
backend_data_directory1 = '/postgresql/pgdata'
backend_flag1 = 'ALLOW_TO_FAILOVER'
backend_application_name1 = 'node111'
backend_hostname2 = '192.168.0.112'
backend_port2 = 5432
backend_weight2 = 1
backend_data_directory2 = '/postgresql/pgdata'
backend_flag2 = 'ALLOW_TO_FAILOVER'
backend_application_name2 = 'node112'
# - Authentication -
enable_pool_hba = on
# - Where to log -
log_destination = 'syslog'
log_connections = on
#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------
pid_file_name = '/postgresql/pgpool/pgpool.pid'
logdir = '/tmp'
#------------------------------------------------------------------------------
# LOAD BALANCING MODE
#------------------------------------------------------------------------------
load_balance_mode = on
EOF
配置 pool_hba.conf
echo "host all all 0.0.0.0/0 md5" >> /postgresql/pgpool/etc/pool_hba.conf
生成pool_passwd文件
pg_md5 --md5auth --username=nobody "passwd"
pg_md5 --md5auth --username=pgpool "passwd"
pg_md5 --md5auth --username=postgres "passwd"
pgsql@node114-> cat pool_passwd
nobody:md5979f0636f5188c5c037fa6eddf977684
pgpool:md592a6043af66f8da8ff9dda6320b95889
postgres:md55305adaac499dbbc6865a44e4aa5d8b4
配置 pcp.conf
pg_md5 -u=pgpool "passwd"
76a2173be6393254e72ffa4d6df1030a
echo "pgpool:76a2173be6393254e72ffa4d6df1030a" >> /postgresql/pgpool/etc/pcp.conf
在主库中创建用户
psql -U postgres
create role nobody login encrypted password 'passwd';
create role pgpool login encrypted password 'passwd';
grant postgres to nobody,pgpool;
node114
设置开机自动启动
cat >> /lib/systemd/system/pgpool.service <<"EOF"
[Unit]
Description=Pgpool-II
After=syslog.target network.target
[Service]
User=pgsql
Group=pgsql
EnvironmentFile=-/etc/sysconfig/pgpool
ExecStart=/postgresql/pgpool/bin/pgpool -f /postgresql/pgpool/etc/pgpool.conf -n
ExecStop=/postgresql/pgpool/bin/pgpool -f /postgresql/pgpool/etc/pgpool.conf -m fast stop
ExecReload=/postgresql/pgpool/bin/pgpool -f /postgresql/pgpool/etc/pgpool.conf reload
LimitNOFILE=65536
KillMode=process
KillSignal=SIGINT
Restart=on-abnormal
RestartSec=30s
TimeoutSec=0
[Install]
WantedBy=multi-user.target
EOF
chmod +x /lib/systemd/system/pgpool.service
systemctl status pgpool
systemctl start pgpool
systemctl enable pgpool
systemctl restart pgpool
实际操作
[root@node114 ~]#
[root@node114 ~]# systemctl status pgpool
● pgpool.service - Pgpool-II
Loaded: loaded (/usr/lib/systemd/system/pgpool.service; disabled; vendor preset: disabled)
Active: inactive (dead)
[root@node114 ~]# systemctl start pgpool
[root@node114 ~]# systemctl enable pgpool
Created symlink from /etc/systemd/system/multi-user.target.wants/pgpool.service to /usr/lib/systemd/system/pgpool.service.
[root@node114 ~]# systemctl status pgpool
● pgpool.service - Pgpool-II
Loaded: loaded (/usr/lib/systemd/system/pgpool.service; enabled; vendor preset: disabled)
Active: active (running) since Sun 2021-07-11 20:02:18 CST; 5s ago
Main PID: 68556 (pgpool)
CGroup: /system.slice/pgpool.service
├─68556 /postgresql/pgpool/bin/pgpool -f /postgresql/pgpool/etc/pgpool.conf -n
├─68558 pgpool: wait for connection request
├─68559 pgpool: wait for connection request
├─68560 pgpool: wait for connection request
├─68561 pgpool: wait for connection request
├─68562 pgpool: wait for connection request
├─68563 pgpool: wait for connection request
├─68564 pgpool: wait for connection request
├─68565 pgpool: wait for connection request
├─68566 pgpool: wait for connection request
├─68567 pgpool: wait for connection request
├─68568 pgpool: wait for connection request
├─68569 pgpool: wait for connection request
├─68570 pgpool: wait for connection request
├─68571 pgpool: wait for connection request
├─68572 pgpool: wait for connection request
├─68573 pgpool: wait for connection request
├─68574 pgpool: wait for connection request
├─68575 pgpool: wait for connection request
├─68576 pgpool: wait for connection request
├─68577 pgpool: wait for connection request
├─68578 pgpool: wait for connection request
├─68579 pgpool: wait for connection request
├─68580 pgpool: wait for connection request
├─68581 pgpool: wait for connection request
├─68582 pgpool: wait for connection request
├─68583 pgpool: wait for connection request
├─68584 pgpool: wait for connection request
├─68585 pgpool: wait for connection request
├─68586 pgpool: wait for connection request
├─68587 pgpool: wait for connection request
├─68588 pgpool: wait for connection request
├─68589 pgpool: wait for connection request
├─68590 pgpool: PCP: wait for connection request
├─68591 pgpool: worker process
└─68592 pgpool: health check process(0)
Jul 11 20:02:18 node114 pgpool[68556]: [9-1] 2021-07-11 20:02:18: pid 68556: LOG: pool_discard_o...maps
Jul 11 20:02:18 node114 pgpool[68556]: [10-1] 2021-07-11 20:02:18: pid 68556: LOG: Setting up so...9999
Jul 11 20:02:18 node114 pgpool[68556]: [11-1] 2021-07-11 20:02:18: pid 68556: LOG: Setting up so...9999
Jul 11 20:02:18 node114 pgpool[68556]: [12-1] 2021-07-11 20:02:18: pid 68556: LOG: find_primary_...node
Jul 11 20:02:18 node114 pgpool[68556]: [13-1] 2021-07-11 20:02:18: pid 68556: LOG: find_primary_...is 0
Jul 11 20:02:18 node114 pgpool[68590]: [14-1] 2021-07-11 20:02:18: pid 68590: LOG: PCP process: ...rted
Jul 11 20:02:18 node114 pgpool[68591]: [14-1] 2021-07-11 20:02:18: pid 68591: LOG: process started
Jul 11 20:02:18 node114 pgpool[68556]: [14-1] 2021-07-11 20:02:18: pid 68556: LOG: pgpool-II suc...shi)
Jul 11 20:02:18 node114 pgpool[68556]: [15-1] 2021-07-11 20:02:18: pid 68556: LOG: node status[0]: 1
Jul 11 20:02:18 node114 pgpool[68592]: [14-1] 2021-07-11 20:02:18: pid 68592: LOG: process started
Hint: Some lines were ellipsized, use -l to show in full.
[root@node114 ~]#
连接 pgpool
[root@node114 ~]#
[root@node114 ~]# su - pgsql
Last login: Sun Jul 11 20:02:49 CST 2021 on pts/0
pgsql@node114-> psql -Upostgres -p 9999
psql (13.3)
Type "help" for help.
postgres=# show pool_nodes;
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replic
ation_delay | replication_state | replication_sync_state | last_status_change
---------+---------------+------+--------+-----------+---------+------------+-------------------+-------
------------+-------------------+------------------------+---------------------
0 | 192.168.0.110 | 5432 | up | 0.333333 | primary | 0 | true | 0
| | | 2021-07-11 20:06:33
1 | 192.168.0.111 | 5432 | unused | 0.333333 | standby | 0 | false | 0
| | | 2021-07-11 20:06:33
2 | 192.168.0.112 | 5432 | unused | 0.333333 | standby | 0 | false | 0
| | | 2021-07-11 20:06:33
(3 rows)
查看pgpool 后端状态
pcp_node_info -U pgpool -h localhost -p 9898 -n 0 -v
pcp_node_info -U pgpool -h localhost -p 9898 -n 1 -v
pcp_node_info -U pgpool -h localhost -p 9898 -n 2 -v
pgsql@node114-> pcp_node_info -U pgpool -h localhost -p 9898 -n 0 -v
Password:
Hostname : 192.168.0.110
Port : 5432
Status : 2
Weight : 0.333333
Status Name : up
Role : primary
Replication Delay : 0
Replication State :
Replication Sync State :
Last Status Change : 2021-07-11 20:06:33
pgsql@node114->
pgsql@node114-> pcp_node_info -U pgpool -h localhost -p 9898 -n 1 -v
Password:
Hostname : 192.168.0.111
Port : 5432
Status : 0
Weight : 0.333333
Status Name : unused
Role : standby
Replication Delay : 0
Replication State :
Replication Sync State :
Last Status Change : 2021-07-11 20:06:33
pgsql@node114->
pgsql@node114-> pcp_node_info -U pgpool -h localhost -p 9898 -n 2 -v
Password:
Hostname : 192.168.0.112
Port : 5432
Status : 0
Weight : 0.333333
Status Name : unused
Role : standby
Replication Delay : 0
Replication State :
Replication Sync State :
Last Status Change : 2021-07-11 20:06:33
pgsql@node114->
可以看到两个备库为 unused
pgpool -m fast stop
pgpool -C -D
可能需要多尝试几次
测试读写分离+负载均衡
测试之前，可以考虑修改文件pgpool.conf中的如下参数：
cat >> /postgresql/pgpool/etc/pgpool.conf << "EOF"
log_statement=all
log_per_node_statement =on
client_min_messages =log
log_min_messages = info
EOF
pgpool reload
测试完成后，修改回原值：
log_statement=off
log_per_node_statement = off
# client_min_messages =notice
# log_min_messages = warning
测试, 开三个窗口
窗口1:
Last Status Change : 2021-07-11 20:29:00
pgsql@node114-> psql -Upostgres -p 9999
psql (13.3)
Type "help" for help.
postgres=# \c test
You are now connected to database "test" as user "postgres".
test=# select * from test_pgpool;
LOG: statement: select * from test_pgpool;
LOG: DB node id: 0 backend pid: 73212 statement: SELECT version()
LOG: DB node id: 0 backend pid: 73212 statement: SELECT count(*) FROM pg_class AS c, pg_namespace AS n WHERE c.oid = pg_catalog.to_regclass('"test_pgpool"') AND c.relnamespace = n.oid AND n.nspname = 'pg_catalog'
LOG: DB node id: 0 backend pid: 73212 statement: SELECT count(*) FROM pg_catalog.pg_class AS c, pg_namespace AS n WHERE c.relname = 'test_pgpool' AND c.relnamespace = n.oid AND n.nspname ~ '^pg_temp_'
LOG: DB node id: 0 backend pid: 73212 statement: SELECT count(*) FROM pg_catalog.pg_class AS c WHERE c.oid = pg_catalog.to_regclass('"test_pgpool"') AND c.relpersistence = 'u'
LOG: DB node id: 0 backend pid: 73212 statement: select * from test_pgpool;
id
----
1
2
3
(3 rows)
test=# select * from test_pgpool;
窗口2:
test=# \q
pgsql@node114-> psql -Upostgres -h 192.168.0.114 -p 9999 -d test
Password for user postgres:
psql (13.3)
Type "help" for help.
test=# select * from test_pgpool;
LOG: statement: select * from test_pgpool;
LOG: DB node id: 0 backend pid: 73232 statement: SELECT count(*) FROM pg_class AS c, pg_namespace AS n WHERE c.oid = pg_catalog.to_regclass('"test_pgpool"') AND c.relnamespace = n.oid AND n.nspname = 'pg_catalog'
LOG: DB node id: 0 backend pid: 73232 statement: SELECT count(*) FROM pg_catalog.pg_class AS c, pg_namespace AS n WHERE c.relname = 'test_pgpool' AND c.relnamespace = n.oid AND n.nspname ~ '^pg_temp_'
LOG: DB node id: 0 backend pid: 73232 statement: SELECT count(*) FROM pg_catalog.pg_class AS c WHERE c.oid = pg_catalog.to_regclass('"test_pgpool"') AND c.relpersistence = 'u'
LOG: DB node id: 1 backend pid: 67106 statement: select * from test_pgpool;
id
----
1
2
3
(3 rows)
窗口3:
pgsql@node114-> psql -Upostgres -h 192.168.0.114 -p 9999 -d test
Password for user postgres:
psql (13.3)
Type "help" for help.
test=# show pool_nodes;
LOG: statement: show pool_nodes;
LOG: DB node id: 0 backend pid: 73272 statement: SELECT version()
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replic
ation_delay | replication_state | replication_sync_state | last_status_change
---------+---------------+------+--------+-----------+---------+------------+-------------------+-------
------------+-------------------+------------------------+---------------------
0 | 192.168.0.110 | 5432 | up | 0.333333 | primary | 11 | false | 0
| | | 2021-07-11 20:29:20
1 | 192.168.0.111 | 5432 | up | 0.333333 | standby | 2 | false | 0
| | | 2021-07-11 20:29:20
2 | 192.168.0.112 | 5432 | up | 0.333333 | standby | 0 | true | 0
| | | 2021-07-11 20:29:20
(3 rows)
test=# select * from test_pgpool;
LOG: statement: select * from test_pgpool;
LOG: DB node id: 0 backend pid: 73272 statement: SELECT count(*) FROM pg_class AS c, pg_namespace AS n WHERE c.oid = pg_catalog.to_regclass('"test_pgpool"') AND c.relnamespace = n.oid AND n.nspname = 'pg_catalog'
LOG: DB node id: 0 backend pid: 73272 statement: SELECT count(*) FROM pg_catalog.pg_class AS c, pg_namespace AS n WHERE c.relname = 'test_pgpool' AND c.relnamespace = n.oid AND n.nspname ~ '^pg_temp_'
LOG: DB node id: 0 backend pid: 73272 statement: SELECT count(*) FROM pg_catalog.pg_class AS c WHERE c.oid = pg_catalog.to_regclass('"test_pgpool"') AND c.relpersistence = 'u'
LOG: DB node id: 2 backend pid: 67873 statement: select * from test_pgpool;
id
----
1
2
3
(3 rows)
关闭客户端日志打印
将之前修改的客户端日志打印配置删除
相当于
log_statement=off
log_per_node_statement = off
# client_min_messages =notice
# log_min_messages = warning
