OK
U-Boot 2010.03 (Dec 23 2014 - 19:13:57) for iTOP-4412 Android
CPU: SMDK4412-AP1.1 [e4412211]
APLL = 1000MHz, MPLL = 800MHz
ARM_CLOCK = 1000MHz
PMIC: Pls check the i2c @ pmic, id = 21,error
Board: iTOP-4412-Quad
POP type: POP for C220
DRAM: 1023 MB
MMC: max_emmc_clock:40 MHZ
Set CLK to 400 KHz
EMMC CLOCK OUTPUT:: 400KHz -[div:50]
response timeout error : 00000104 cmd 8
response timeout error : 00000104 cmd 55
max_emmc_clock:40 MHZ
Input CLK [ 50 MHz] is higher than limit [40 MHZ]
Set CLK to 40000 KHz
EMMC clock output: 40000 KHz
max_emmc_clock:40 MHZ
Input CLK [ 50 MHz] is higher than limit [40 MHZ]
Set CLK to 40000 KHz
EMMC clock output: 40000 KHz
MMC0: 3728 MB
SD sclk_mmc is 400K HZ
SD sclk_mmc is 50000K HZ
SD sclk_mmc is 50000K HZ
MMC1: 30436 MB
*** Warning - using default environment
In: serial
Out: serial
Err: serial
Checking Boot Mode … SDMMC
SYSTEM ENTER NORMAL BOOT MODE
Hit any key to stop autoboot: 0
reading kernel… 1120, 12288
MMC read: dev # 1, block # 1120, count 12288 …12288 blocks read: OK
completed
reading RFS… 13408, 2048
MMC read: dev # 1, block # 13408, count 2048 …2048 blocks read: OK
completed
Boot with zImage
Wrong Ramdisk Image Format
[err] boot_get_ramdisk
Starting kernel …
Uncompressing Linux… done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.15 (root@cym-virtual-machine) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #17 SMP PREEMPT Tue Mar 31 22:00:53 CST 2020
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: SMDK4X12
[ 0.000000] **************************
[ 0.000000] reserve_panic_dump_area!!
[ 0.000000] **************************
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
CPU: SMDK4412-AP1.1 [e4412211]
uboot开始打印：\cpu\arm_cortexa9\s5pc210\cpu_info.c
Starting kernel …
uboot结束打印：lib_arm\bootm.c
Uncompressing Linux… done, booting the kernel.
kernel开始打印：arch\arm\boot\compressed\misc.c
