九鼎公司提供的sd_fusing.sh默认只生成一个分区,这在在sd_fdisk.c中可见前3行被注释,
? ? ? ? //encode_partitionInfo(partInfo[0], &mbr[0x1CE]); ? ? ? ? //encode_partitionInfo(partInfo[1], &mbr[0x1DE]); ? ? ? ? //encode_partitionInfo(partInfo[2], &mbr[0x1EE]); ? ? ? ? encode_partitionInfo(partInfo[3], &mbr[0x1BE]);
打开注释后还是发现生成不了4个分区。于是想到uboot启动后有格式花命令fdisk,可用它来格式化SD卡:
uboot-myx210 # fdisk -c 1 (1 表示插槽一上的mmc2(x210有四的sd通道,mmc0为内部inand,mmc2,mmc3为外部sd卡,我的卡插在第一个插槽,也就是mmc2上)))
partion # ? ?size(MB) ? ? block start # ? ?block count ? ?partition_Id ? ?1 ? ? ? ? ? 256 ? ? ? ? ? ?20480 ? ? ? ? ?524288 ? ? ? ? ?0x83 ? ?2 ? ? ? ? ? 120 ? ? ? ? ? 544768 ? ? ? ? ?245760 ? ? ? ? ?0x83 ? ?3 ? ? ? ? ? 100 ? ? ? ? ? 790528 ? ? ? ? ?204800 ? ? ? ? ?0x83(可以烧录linux) ? ?4 ? ? ? ? 14697 ? ? ? ? ? 995328 ? ? ? ?30100480 ? ? ? ? ?0x83(可以烧录rootfs)
-------------------------------------------------------------------------zhi
之后修改sd_fusing.sh,注释分区和格式化部分,只留下烧写部分
#################################### # make partition #jimmy comment echo "make sd card partition" #echo "./sd_fdisk $1" #sudo ./sd_fdisk $1 #sudo dd iflag=dsync oflag=dsync if=sd_mbr.dat of=$1 #rm sd_mbr.dat
#################################### # format #umount $partition1 2> /dev/null #umount $partition2 2> /dev/null #umount $partition3 2> /dev/null #umount $partition4 2> /dev/null
#echo "mkfs.vfat -F 32 $partition1" #sudo mkfs.vfat -F 32 $partition1
#echo "mkfs.ext2 $partition2" #mkfs.ext2 $partition2
#echo "mkfs.ext2 $partition3" #mkfs.ext2 $partition3
#echo "mkfs.ext2 $partition4" #mkfs.ext2 $partition4
bl1_position=1 uboot_position=49
echo "BL1 fusing" sudo ./mkbl1 ../u-boot.bin SD-bl1-8k.bin 8192 sudo dd iflag=dsync oflag=dsync if=SD-bl1-8k.bin of=$1 seek=$bl1_position rm SD-bl1-8k.bin #<u-boot fusing> echo "u-boot fusing" sudo dd iflag=dsync oflag=dsync if=../u-boot.bin of=$1 seek=$uboot_position ?
——————————————————————————————————————————
这只是uboot的烧录(位于sd卡里1-49为8kbu部分,49之后为uboot但是这都在4个分区的前面),然后可以烧入linux到 /dev/sdb3 及rootfs到/dev/sdb3
ubuntu# sudo dd if=/tftpboot/zImage-qt of=/dev/sdb3 bs=1k count=20000 (20000块,相当于10M) ?ubuntu#sudo dd if=/tftpboot/rootfs_qt4.ext3 of=/dev/sdb4 bs=1k count=512000? (512000? 块,相当于256M)
之后可以配置开发板环境变量:
mmcblk1p4为mmc2的第四个分区也就是之前烧录的sdb4
myx210#setenv bootargs "noinitrd console=ttySAC2,115200 root=/dev/mmcblk1p4 rw init=/linuxrc rootfstype=ext3"
myx210# setenv bootcmd "??mmc read 1 30008000 790528(分区3的开始柱面) 10000(读取的块size,大概5M); bootm 30008000"
输出如下:
---------------------------------------------------------------------------------------------- U-Boot 1.3.4-dirty (Dec 21 2022 - 10:30:15) for x210
CPU: ?S5PV210@1000MHz(OK) ? ? ? ? APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz ? ? ? ? MPLL = 667MHz, EPLL = 96MHz ? ? ? ? ? ? ? ? ? ? ? ?HclkDsys = 166MHz, PclkDsys = 83MHz ? ? ? ? ? ? ? ? ? ? ? ?HclkPsys = 133MHz, PclkPsys = 66MHz ? ? ? ? ? ? ? ? ? ? ? ?SCLKA2M ?= 200MHz Serial = CLKUART Board: ? X210 DRAM: ? ?512 MB Flash: ? 8 MB SD/MMC: ?3776MB In: ? ? ?serial Out: ? ? serial Err: ? ? serial [LEFT UP] boot mode checking mode for fastboot ... Hit any key to stop autoboot: ?0 myx210 # print bootcmd=movi read kernel 30008000; movi read rootfs 30B00000 300000; bootm 30008000 30B00000 mtdpart=80000 400000 3000000 bootdelay=3 baudrate=115200 ethaddr=00:40:5c:26:0a:5b netmask=255.255.255.0 serverip=192.168.0.43 gatewayip=192.168.0.1 ipaddr=192.168.0.88 bootargs=noinitrd console=ttySAC2,115200 root=/dev/mmcblk0p2 rw init=/linuxrc rootfstype=ext3
Environment size: 356/16380 bytes myx210 # setenv bootargs "noinitrd console=ttySAC2,115200 root=/dev/mmcblk1p4 rw init=/linuxrc rootfstype=ext3" myx210 # mmc read 1 30008000 790528 10000
MMC read: dev # 1, block # 790528, count 10000 ...10000 blocks read: OK myx210 # bootm 30008000 Boot with zImage
Starting kernel ...
[ ? ?0.000000] Initializing cgroup subsys cpu [ ? ?0.000000] Linux version 2.6.35.7+ (jimmy@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #3 PREEMPT Fri Nov 18 10:16:14 PST 2022 [ ? ?0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f [ ? ?0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ ? ?0.000000] Machine: SMDKV210 [ ? ?0.000000] @@@@@@@ atags_pointer not null [ ? ?0.000000] @@@@@@@linter#####boot_params:c0000100,mdesc->boot_params:40000002 [ ? ?0.000000] Ignoring unrecognised tag 0x41001099 [ ? ?0.000000] $$$$$$$$$cmdline:noinitrd console=ttySAC2,115200 root=/dev/mmcblk1p4 rw init=/linuxrc rootfstype=ext3 [ ? ?0.000000] Memory policy: ECC disabled, Data cache writeback [ ? ?0.000000] CPU S5PV210/S5PC110 (id 0x43110220) [ ? ?0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ ? ?0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=96000000 V=54000000 [ ? ?0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000 [ ? ?0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000 [ ? ?0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000 [ ? ?0.000000] sclk_onenand: source is hclk_psys (0), rate is 66700000 [ ? ?0.000000] sclk: source is mout_mpll (6), rate is 66700000 [ ? ?0.000000] sclk: source is mout_mpll (6), rate is 66700000 [ ? ?0.000000] sclk: source is mout_mpll (6), rate is 66700000 [ ? ?0.000000] sclk: source is mout_mpll (6), rate is 66700000 [ ? ?0.000000] sclk_mixer: source is sclk_dac (0), rate is 24000000 [ ? ?0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000 [ ? ?0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_cam0: source is xusbxti (1), rate is 12000000 [ ? ?0.000000] sclk_cam1: source is ext_xtal (0), rate is 12000000 [ ? ?0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857 [ ? ?0.000000] sclk_mmc: source is mout_epll (7), rate is 96000000 [ ? ?0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857 [ ? ?0.000000] sclk_mmc: source is mout_epll (7), rate is 96000000 [ ? ?0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000 [ ? ?0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000 [ ? ?0.000000] sclk: source is sclk_a2m (0), rate is 100000000 [ ? ?0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000 [ ? ?0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x30c04000 [ ? ?0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000 [ ? ?0.000000] s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x42400000 [ ? ?0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x43c00000 [ ? ?0.000000] s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x445ab000 [ ? ?0.000000] s5pv210: 25165824 bytes system memory reserved for jpeg at 0x45dab000 [ ? ?0.000000] s5pv210: 4915200 bytes system memory reserved for fimd at 0x475ab000 [ ? ?0.000000] s5pv210: 10485760 bytes system memory reserved for texstream at 0x47a5b000 [ ? ?0.000000] s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x4845b000 [ ? ?0.000000] s5pv210: 8388608 bytes system memory reserved for g2d at 0x48794000 [ ? ?0.000000] Built 1 zonelists in Zone order, mobility grouping on. ?Total pages: 130048 [ ? ?0.000000] Kernel command line: noinitrd console=ttySAC2,115200 root=/dev/mmcblk1p4 rw init=/linuxrc rootfstype=ext3 [ ? ?0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ ? ?0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ ? ?0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ ? ?0.000000] Memory: 256MB 256MB = 512MB total [ ? ?0.000000] Memory: 327720k/327720k available, 196568k reserved, 0K highmem [ ? ?0.000000] Virtual kernel memory layout: [ ? ?0.000000] ? ? vector ?: 0xffff0000 - 0xffff1000 ? ( ? 4 kB) [ ? ?0.000000] ? ? fixmap ?: 0xfff00000 - 0xfffe0000 ? ( 896 kB) [ ? ?0.000000] ? ? DMA ? ? : 0xff000000 - 0xffe00000 ? ( ?14 MB) [ ? ?0.000000] ? ? vmalloc : 0xe0800000 - 0xfc000000 ? ( 440 MB) [ ? ?0.000000] ? ? lowmem ?: 0xc0000000 - 0xe0000000 ? ( 512 MB) [ ? ?0.000000] ? ? modules : 0xbf000000 - 0xc0000000 ? ( ?16 MB) [ ? ?0.000000] ? ? ? .init : 0xc0008000 - 0xc0033000 ? ( 172 kB) [ ? ?0.000000] ? ? ? .text : 0xc0033000 - 0xc06ea000 ? (6876 kB) [ ? ?0.000000] ? ? ? .data : 0xc06ea000 - 0xc0737740 ? ( 310 kB) [ ? ?0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ ? ?0.000000] Hierarchical RCU implementation. [ ? ?0.000000] ?RCU-based detection of stalled CPUs is disabled. [ ? ?0.000000] ?Verbose stalled-CPUs detection is disabled. [ ? ?0.000000] NR_IRQS:393 [ ? ?0.000000] VIC @fd000000: id 0x00041192, vendor 0x41 [ ? ?0.000000] VIC @fd010000: id 0x00041192, vendor 0x41 [ ? ?0.000000] VIC @fd020000: id 0x00041192, vendor 0x41 [ ? ?0.000000] VIC @fd030000: id 0x00041192, vendor 0x41 [ ? ?0.000000] mult[140737] [ ? ?0.000000] max_delta_ns[2937815369] [ ? ?0.000000] min_delta_ns[30517] [ ? ?0.000000] rate[32768] [ ? ?0.000000] HZ[256] [ ? ?0.000000] Console: colour dummy device 80x30 [ ? ?0.000000] console [ttySAC2] enabled [ ? ?0.507240] Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696) [ ? ?0.590952] pid_max: default: 32768 minimum: 301 [ ? ?0.595602] Mount-cache hash table entries: 512 [ ? ?0.600327] Initializing cgroup subsys debug [ ? ?0.604310] Initializing cgroup subsys cpuacct [ ? ?0.608724] Initializing cgroup subsys freezer [ ? ?0.613165] CPU: Testing write buffer coherency: ok [ ? ?0.619956] regulator: core version 0.5 [ ? ?0.622442] NET: Registered protocol family 16 [ ? ?0.631990] S3C Power Management, Copyright 2004 Simtec Electronics [ ? ?0.636793] pmstats at 00000000 [ ? ?0.639919] Open OV2655 camema sensor [ ? ?0.777330] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857 [ ? ?0.783439] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857 [ ? ?0.790974] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857 [ ? ?0.798511] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857 [ ? ?0.806057] smdkv210_nand_io_init [ ? ?0.809716] S5PV210: Initializing architecture [ ? ?0.814062] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0 [ ? ?0.822189] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8 [ ? ?0.830591] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12 [ ? ?0.839082] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16 [ ? ?0.847692] regulator: pd_audio_supply: 5000 mV normal [ ? ?0.852853] regulator: pd_cam_supply: 5000 mV normal [ ? ?0.857864] regulator: pd_tv_supply: 5000 mV normal [ ? ?0.862798] regulator: pd_lcd_supply: 5000 mV normal [ ? ?0.867826] regulator: pd_g3d_supply: 5000 mV normal [ ? ?0.872850] regulator: pd_mfc_supply: 5000 mV normal [ ? ?0.883696] bio: create slab <bio-0> at 0 [ ? ?0.886786] SCSI subsystem initialized [ ? ?0.890070] usbcore: registered new interface driver usbfs [ ? ?0.895477] usbcore: registered new interface driver hub [ ? ?0.900787] usbcore: registered new device driver usb [ ? ?0.906243] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter [ ? ?0.911336] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter [ ? ?0.916654] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter [ ? ?0.922147] Advanced Linux Sound Architecture Driver Version 1.0.23. [ ? ?0.928558] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. [ ? ?0.935685] cfg80211: Calling CRDA to update world regulatory domain [ ? ?0.941969] Switching to clocksource clock_source_systimer [ ? ?0.952300] NET: Registered protocol family 2 [ ? ?0.955371] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ ? ?0.962786] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ ? ?0.969602] TCP bind hash table entries: 16384 (order: 6, 327680 bytes) [ ? ?0.976341] TCP: Hash tables configured (established 16384 bind 16384) [ ? ?0.982394] TCP reno registered [ ? ?0.985517] UDP hash table entries: 256 (order: 1, 12288 bytes) [ ? ?0.991426] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ ? ?0.997866] NET: Registered protocol family 1 [ ? ?1.002290] RPC: Registered udp transport module. [ ? ?1.006748] RPC: Registered tcp transport module. [ ? ?1.011422] RPC: Registered tcp NFSv4.1 backchannel transport module. [ ? ?1.017987] PMU: registered new PMU device of type 0 [ ? ?1.022811] wifi power management [ ? ?1.026307] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics [ ? ?1.031741] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling [ ? ?1.037818] smdkc110-rtc smdkc110-rtc: rtc core: registered s3c as rtc0 [ ? ?1.044317] S5PV210 ADC driver, (c) 2010 Samsung Electronics [ ? ?1.050103] cpuidle: phy_regs_save:0x4fd7d000 [ ? ?1.054532] input: s3c-button as /devices/virtual/input/input0 [ ? ?1.060052] s3c button Initialized!! [ ? ?1.063716] Loaded driver for PL330 DMAC-0 s3c-pl330 [ ? ?1.068543] ?DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32 [ ? ?1.074669] Loaded driver for PL330 DMAC-1 s3c-pl330 [ ? ?1.079545] ?DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ ? ?1.085684] Loaded driver for PL330 DMAC-2 s3c-pl330 [ ? ?1.090545] ?DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ ? ?1.103353] ashmem: initialized [ ? ?1.105628] NTFS driver 2.1.29 [Flags: R/W]. [ ? ?1.109301] JFFS2 version 2.2. (NAND) (SUMMARY) ?? 2001-2006 Red Hat, Inc. [ ? ?1.116321] ROMFS MTD (C) 2007 Red Hat, Inc. [ ? ?1.120505] msgmni has been set to 640 [ ? ?1.126695] alg: No test for stdrng (krng) [ ? ?1.129374] io scheduler noop registered [ ? ?1.133258] io scheduler deadline registered [ ? ?1.137479] io scheduler cfq registered (default) [ ? ?1.142827] s3cfb s3cfb: [fb2] dma: 0x475ab000, cpu: 0xe1000000, size: 0x004b0000 [ ? ?1.153582] FIMD src sclk = 166750000 [ ? ?1.155816] s3cfb s3cfb: registered successfully [ ? ?1.160371] Start display and show logo [ ? ?1.264941] x210 led driver [ ? ?1.332164] PA FB = 0x475AB000, bits per pixel = 32 [ ? ?1.335598] screen width=1024 height=600 va=0xd75ab000 pa=0x475ab000 [ ? ?1.341906] xres_virtual = 1024, yres_virtual = 1200, xoffset = 0, yoffset = 0 [ ? ?1.349089] fb_size=4915200 [ ? ?1.351875] Back frameBuffer[0].VAddr=d7803000 PAddr=47803000 size=2457600 [ ? ?1.359037] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10 [ ? ?1.367183] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10 [ ? ?1.375247] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10 [ ? ?1.383363] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10 [ ? ?1.395623] brd: module loaded [ ? ?1.399392] loop: module loaded [ ? ?1.401128] pmem_gpu1: 1 init [ ? ?1.404452] Android kernel panic handler initialized (bind=kpanic) [ ? ?1.410625] S3C NAND Driver, (c) 2008 Samsung Electronics [ ? ?1.415649] Unknown NAND Device. [ ? ?1.418813] PPP generic driver version 2.4.2 [ ? ?1.423195] PPP Deflate Compression module registered [ ? ?1.428028] PPP BSD Compression module registered [ ? ?1.433416] PPP MPPE Compression module registered [ ? ?1.437478] NET: Registered protocol family 24 [ ? ?1.443470] dm9000 Ethernet Driver, V1.31 [ ? ?1.447261] eth0: dm9000c at e08f4300,e08f8304 IRQ 42 MAC: 00:09:c0:ff:ec:48 (platform data) [ ? ?1.454495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ ? ?1.461048] s5p-ehci s5p-ehci: s5pv210 EHCI [ ? ?1.465095] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 [ ? ?1.472177] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000 [ ? ?1.486415] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00 [ ? ?1.490407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ ? ?1.497107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ ? ?1.504297] usb usb1: Product: s5pv210 EHCI [ ? ?1.508450] usb usb1: Manufacturer: Linux 2.6.35.7+ ehci_hcd [ ? ?1.514088] usb usb1: SerialNumber: s5pv210 [ ? ?1.518687] hub 1-0:1.0: USB hub found [ ? ?1.521996] hub 1-0:1.0: 1 port detected [ ? ?1.526053] Initializing USB Mass Storage driver... [ ? ?1.530821] usbcore: registered new interface driver usb-storage [ ? ?1.536703] USB Mass Storage support registered. [ ? ?1.541546] mice: PS/2 mouse device common for all mice [ ? ?1.546812] S5P Touchscreen driver, (c) 2008 Samsung Electronics [ ? ?1.552573] s3c-ts s3c-ts: Created Median filter len:5 coords:2 dec_threshold:6 [ ? ?1.559777] s3c-ts s3c-ts: Created Mean filter len:3 coords:2 [ ? ?1.565519] s3c-ts s3c-ts: Created Linear filter coords:2 [ ? ?1.570861] s3c-ts s3c-ts: Created zoom filter coords:2 [ ? ?1.576050] s3c-ts s3c-ts: 4 filter(s) initialized [ ? ?1.580837] S5P TouchScreen got loaded successfully : 12 bits [ ? ?1.586697] input: S5P TouchScreen as /devices/virtual/input/input1 [ ? ?1.593113] [GSLX680] Enter gslX680_ts_init [ ? ?1.597169] input: gslX680 as /devices/platform/s3c2440-i2c.1/i2c-1/1-0040/input/input2 [ ? ?1.830514] using rtc device, s3c, for alarms [ ? ?1.833356] i2c /dev entries driver [ ? ?1.837305] Linux video capture interface: v2.00 [ ? ?1.841581] gspca: main v2.9.0 registered [ ? ?1.845576] s3c-csis: Samsung MIPI-CSI2 driver probed successfully [ ? ?1.851651] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics [ ? ?1.851658] [ ? ?1.860226] S3C JPEG Driver, (c) 2007 Samsung Electronics [ ? ?1.865212] JPEG driver for S5PV210 [ ? ?1.869317] i2c i2c-1: attached s5p_ddc into i2c adapter successfully [ ? ?1.875121] S5PC11X HPD Driver, (c) 2009 Samsung Electronics [ ? ?1.880956] S5PC11X CEC Driver, (c) 2009 Samsung Electronics [ ? ?1.886848] usbcore: registered new interface driver uvcvideo [ ? ?1.892074] USB Video Class driver (v0.1.0) [ ? ?1.897874] device-mapper: uevent: version 1.0.3 [ ? ?1.903651] gslX680 1-0040: read failed [ ? ?1.906057] usb 1-1: new high speed USB device using s5p-ehci and address 2 [ ? ?1.913423] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ ? ?1.921426] cpuidle: using governor ladder [ ? ?1.925506] cpuidle: using governor menu [ ? ?1.929379] sdhci: Secure Digital Host Controller Interface driver [ ? ?1.935478] sdhci: Copyright(c) Pierre Ossman [ ? ?1.939926] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz) [ ? ?1.946412] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz) [ ? ?1.953003] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz) [ ? ?1.959911] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA [ ? ?1.966821] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz) [ ? ?1.973367] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz) [ ? ?1.979955] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz) [ ? ?2.057060] wifi power enabled [ ? ?2.058726] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA [ ? ?2.065716] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz) [ ? ?2.072273] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz) [ ? ?2.078848] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz) [ ? ?2.085711] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA [ ? ?2.092668] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz) [ ? ?2.099211] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz) [ ? ?2.105803] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz) [ ? ?2.112675] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA [ ? ?2.120109] usbcore: registered new interface driver hiddev [ ? ?2.125181] usbcore: registered new interface driver usbhid [ ? ?2.130665] usbhid: USB HID core driver [ ? ?2.134898] logger: created 64K log 'log_main' [ ? ?2.139002] logger: created 256K log 'log_events' [ ? ?2.143682] logger: created 64K log 'log_radio' [ ? ?2.148181] logger: created 64K log 'log_system' [ ? ?2.154784] No device for DAI WM8976 HiFi [ ? ?2.157341] s3c64xx_iis_dai_init:s3c64xx-i2s0 [ ? ?2.161879] s3c64xx_iis_dev_probe:id0 !!! [ ? ?2.165749] s3c64xx_iis_dai_init:s3c64xx-i2s1 [ ? ?2.170411] WM8976 Audio Codec 0.4wm8976_probe: i2c_master_send [ ? ?2.176186] wm8976_init [ ? ?2.231270] mmc0: new high speed MMC card at address 0001 [ ? ?2.235447] mmcblk0: mmc0:0001 004GE0 3.68 GiB [ ? ?2.239978] ?mmcblk0: p1 p2 p3 p4 [ ? ?2.257660] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ ? ?2.262890] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ ? ?2.270000] usb 1-1: Product: USB2.0 Hub [ ? ?2.274637] hub 1-1:1.0: USB hub found [ ? ?2.277910] hub 1-1:1.0: 4 ports detected [ ? ?2.763180] mmc2: new high speed SDHC card at address aaaa [ ? ?2.767388] mmcblk1: mmc2:aaaa SL16G 14.8 GiB [ ? ?2.771812] ?mmcblk1: p1 p2 p3 p4 [ ? ?2.953031] s3c_idma_preallocate_buffer: ?VA-e0940000 ?PA-C0000000 ?163840bytes [ ? ?2.959145] s3c_preallocate_dma_buffer: VA-ff007000, PA-4FF40000, 131072bytes [ ? ?2.965973] asoc: WM8976 HiFi <-> s3c64xx-i2s0 mapping ok [ ? ?2.974605] ALSA device list: [ ? ?2.976114] ? #0: smdkc1000 (WM8976) [ ? ?2.979687] GACT probability NOT on [ ? ?2.983130] Mirror/redirect action on [ ? ?2.986767] u32 classifier [ ? ?2.989436] ? ? Actions configured [ ? ?2.992828] Netfilter messages via NETLINK v0.30. [ ? ?2.997570] nf_conntrack version 0.5.0 (5120 buckets, 20480 max) [ ? ?3.003638] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ ? ?3.010860] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ ? ?3.018741] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ ? ?3.025538] ctnetlink v0.93: registering with nfnetlink. [ ? ?3.030412] xt_time: kernel timezone is -0000 [ ? ?3.036617] ip_tables: (C) 2000-2006 Netfilter Core Team [ ? ?3.040552] arp_tables: (C) 2002 David S. Miller [ ? ?3.045118] TCP cubic registered [ ? ?3.048266] NET: Registered protocol family 10 [ ? ?3.054489] lo: Disabled Privacy Extensions [ ? ?3.061866] Mobile IPv6 [ ? ?3.062833] IPv6 over IPv4 tunneling driver [ ? ?3.068563] sit0: Disabled Privacy Extensions [ ? ?3.074284] ip6tnl0: Disabled Privacy Extensions [ ? ?3.078780] NET: Registered protocol family 17 [ ? ?3.081876] NET: Registered protocol family 15 [ ? ?3.086312] lib80211: common routines for IEEE802.11 drivers [ ? ?3.091991] ThumbEE CPU extension supported. [ ? ?3.096255] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ ? ?3.104342] regulator_init_complete: disabling pd_mfc_supply [ ? ?3.109423] regulator_init_complete: disabling pd_tv_supply [ ? ?3.114966] regulator_init_complete: disabling pd_cam_supply [ ? ?3.120636] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling [ ? ?3.126583] smdkc110-rtc smdkc110-rtc: setting system clock to 2010-01-01 22:19:28 UTC (1262384368) [ ? ?3.137161] FIMC0 registered successfully [ ? ?3.140992] FIMC1 registered successfully [ ? ?3.144962] FIMC2 registered successfully [ ? ?3.147737] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics [ ? ?3.154421] s5p-tvout s5p-tvout: hpd status is cable removed [ ? ?3.165458] DBUG_PORT must not use AFC! [ ? ?3.209812] EXT4-fs (mmcblk1p4): recovery complete [ ? ?3.214420] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null) [ ? ?3.221209] VFS: Mounted root (ext3 filesystem) on device 179:12. [ ? ?3.227298] Freeing init memory: 172K [ ? ?3.373323] EXT4-fs (mmcblk1p4): re-mounted. Opts: barrier=1,nodelalloc,data=ordered Starting logging: OK Starting mdev... Initializing random number generator... done. Starting network... [ ? ?4.361426] eth0: link down [ ? ?4.362926] ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.21.0) started Sending discover... [ ? ?6.056726] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ ? ?6.061207] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.0.50... Lease of 192.168.0.50 obtained, lease time 20 deleting routers route: SIOCDELRT: No such process adding dns 192.168.0.1 Starting sshd: OK Starting qttest... [ ? ?7.807028] EXT2-fs (mmcblk0p4): error: couldn't mount because of unsupported optional features (4) [ ? ?7.830100] EXT4-fs (mmcblk0p4): warning: mounting unchecked fs, running e2fsck is recommended [ ? ?7.838797] EXT4-fs (mmcblk0p4): recovery complete [ ? ?7.842108] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null) hdmi_x210 start connect::m_flagHWConnected() fail =============== HDMI Audio ?============= ========= HDMI Mode & Color Space ======= = ?1. HDMI(YCbCr) ? ? ? ? ? ? ? ? ? ? ? = = ?2. HDMI(RGB) ? ? ? ? ? ? ? ? ? ? ? ? = =========== x210 HDMI Rseolution ======== = ?4. 480P_60_16_9 ? ? ?(0x04000000) ? ?= = ?5. 480P_60_4_3 ? ? ? (0x05000000) ? ?= = ?6. 576P_50_16_9 ? ? ?(0x06000000) ? ?= = ?7. 576P_50_4_3 ? ? ? (0x07000000) ? ?= = ?8. 720P_60 ? ? ? ? ? (0x08000000) ? ?= = ?9. 720P_50 ? ? ? ? ? (0x09000000) ? ?= = ?a. 1080P_60 ? ? ? ? ?(0x0a000000) ? ?= = ?b. 1080P_50 ? ? ? ? ?(0x0b000000) ? ?= = ?c. 1080I_60 ? ? ? ? ?(0x0c000000) ? ?= = ?d. 1080I_50 ? ? ? ? ?(0x0d000000) ? ?= = ?i. 1080P_30 ? ? ? ? ?(0x12000000) ? ?= =========================================
Welcome to Buildroot x210v3 login: Error opening mouse device '/dev/input/mouse2': No such file or directory
Welcome to Buildroot x210v3 login: ?
|